информация о продукте:
Product Features of BT-2 Grinding Wheel Dressing Machine:
1. The precise linear sliding track and ball screw are adopted, and the digital grating ruler is added. When the grinding wheel is dressed, the positioning accuracy and width dimension are adjusted and measured at any time.
2. High precision bearings are used in both rotating axles, which have achieved rotating accuracy and stability.
3. The speed of dressing wheel, the swing speed of left and right, the size of swing stroke and the position of grinding wheel can be adjusted.
4. The speed of the repaired grinding wheel is adjustable, and the position of the repaired grinding wheel can be adjusted by cross slide.
5. The angle of the dressing wheel can be adjusted more accurately and more conveniently by adding the circular grating to the manual shaft. The display accuracy is 0.05 °.
6. A CCD camera with a magnification of 15 to 120 times can measure and check the arc, angle, sharp angle and size of grinding wheel in work.
7. CCD and grating size devices provide simple settings and measurements of grinding wheel width and position as well as inspection during or after dressing. The measurement accuracy can reach 0.005-0.01mm.
Main Technical Parameters of BT-2 Grinding Wheel Dressing Machine And Accessories
1. The taper of Diamond /CBN wheel spindle: BT30
2. Maximum diameter of Diamond/CBN wheel: ϕ200mm
3. The minimum diameter of the Diamond /CBN wheel: ϕ60mm
4. The maximum thickness of the Diamond /CBN wheel: 80
5. The bore of Diamond /CBN wheel: ϕ31.75mm
6. Speed of Diamond /CBN wheel: 720 rpm/min
7. Motor power of Diamond /CBN wheel: 750W
8. Left and right distance of Diamond /CBN wheel: 120mm
9. Front and back distance of Diamond /CBN wheel: 125mm
10. Repairing wheel (SIC) specification: ϕ180*10*ϕ31.75mm
11. Repairing wheel (SIC) speed: 10-3000 rpm/min
12. Left and right swing number of repairing wheel (SIC): 1-60Hz
13. Left and right swing distance of repairing wheel (SIC): 0-50mm
14. Motor power of repairing wheel (SIC): 750W
15. Motor power of swinging: 15W
16. The angle of repairing wheel is manually selected: ±90°
16. Angle of repairing wheel is manually selected ±90° 17 Magnification of CCD: 15-120 Times.
